cPCI 6U Backplane Series
Hartmann Electronic’s CompactPCI 6U Professional Series features a sleek board design based on High Speed Design concept with exceptionally low-level reflection. The featured reflection levels are achieved by means of uniform signal surge impedance. The design features an energy buffering feature which works across the entire frequency range. This guarantees improved reliability thanks to more stable supply-voltages directly at each slot in conjunction with fluctuating loads. Continuous electrically conductive chassis GND surface located in the area where the backplane is mounted on the card rack. An M3 screw connection is available to connect chassis ground.
Product Description
cPCI 6U Backplane Series
- Form Factor 6U
- System Slot Right
- Slots 2-20
- Slot Pitch 4HP (20.32 mm)
- Power Feed RA Series: Screws, RB Series: ATX, screws
- Supply Voltage V I/O 3.3V, 3.3V / 5V fixed or selectable via jumper, 5.0V
- Clock Frequency 33 MHz, 66 MHz
- Transfer Mode 64 bit
- Rear I/O Yes
- PCI to PCI Bridge N/A
- Utility Connector JTAG, IPMB
- Geographic Addressing Yes
- Permissible Current Load 5V up to 8A/slot, 3.3V up to 10A/slot
- PCB Design Optimized for best HF behavior
- Base Specification PICMG 2.0, R3.0
- Hot Swap Specification PICMG 2.1, R1.0
- Base Material Type FR-4 UL 94 V-0
- Ohmic Resistance < 1.5 Ohm
- Impedance Z of Bare PCB 65 Ohm
- Chassis GND – Continuous chassis GND surface where backplane is mounted to rack, comes with M3 screw for chassis GND
- Card Thickness 2.8 (.11″)
- Connectors 2 mm press-fit, quality grade 2
- Terminal, 8 slots On-board Schottky barrier diodes
- Operating Temperature ≤ 8 slots: -40°C … +85°C
- Relative Humidity 90%, non-condensing
