cPCI 3U Backplane – RD Series
The backplane design features an energy buffering feature which works across the entire frequency range. This guarantees improved reliability due to more stable supply voltages directly at each slot in conjunction with fluctuating loads. Continuous electrically conductive chassis GND surface located in the area where the backplane is mounted on the card rack. An M3 screw connection is available to connect chassis ground.
Product Description
cPCI 3U Backplane – RD Series
- Form Factor 3U
- System Slot Right
- Slots 1, 2, 3, 4, 5, 6, 7, 8
- Slot Pitch 4HP (20.32 mm) power supply slot 8HP
- Power Feed P47 Connector, for 8HP wide power supplies (ATX connector, screw terminals / professional)
- Supply Voltage V I/O 3.3V, 5.0V
- pa_clock 303
- Transfer Mode 32 bit
- Rear I/O No, Yes
- PCI to PCI Bridge N/A
- Utility Connector JTAG, (IPMB / Professional)
- Geographic Addressing With Rear I/O w/o geo addressing
- Permissible Current Load 5V up to 8A/slot, 3.3V up to 10A/slot
- PCB Design Optimized for best HF behavior
- Base Specification PICMG 2.0, R3.0
- Hot Swap Specification PICMG 2.1, R1.0
- Base Material Type FR-4 UL 94 V-0
- Ohmic Resistance < 1.5 Ohm
- Impedance Z of Bare PCB 65 Ohm
- Chassis GND – Continuous chassis GND surface where backplane is mounted to rack, comes with M3 screw for chassis GND
- Card Thickness 2.8 (.11″)
- Connectors 2 mm press-fit, quality grade 2
- Terminal, 8 slots On-board Schottky barrier diodes
- Operating Temperature ≤ 8 slots: -40°C … +85°C
- Relative Humidity 90%, non-condensing