VME 3U Backplane – 129-130-30-31 Series
The 3U 129-130-30-31 Series boast a variety of configurations to fit a complex array of needs. From 2 to 21 slots, optional active or passive termination, there is an option for every need.
Product Description
VME 3U Backplane – 129-130-30-31 Series
- Form Factor 3U J1, 3U J2
- Slots 2-21
- Slot Pitch 4HP (20.32 mm)
- Power Consumption, Both Ends Terminated Active: < 0.1A, Passive: <1.0A
- Daisy Chaining 748, 336, 747, 337
- Power Supply Connection Screw-type M4 / Faston 6.3 x .8 mm
- Permissible Current Load 200A terminal bar, 25A combined double spade/ screw connection, 10A Faston connector
- Permissible Current Load Per Slot +5V 4.5A, +12V 1.5A, -12V 1.5A, +5V Standby 1.5A
- Termination ON/IN Board 333, 332
- PCB Design Optimized for best HF behavior
- Base Specification ANSI/VITA 1.1-1997
- Base Material Type FR-4
- Ohmic Resistance < 1.5 Ohm
- Surge Impedance Z of Signal Lines 60 Ohm
- Chassis GND – Continuous chassis GND surface where backplane is mounted to rack., HF coupling of rack and system ground implemented by capacitors (10nF, 200V each slot). Chassis ground combination M6 screw / Faston 6.3 x .8 mm
- Card Thickness 3.2 mm (.13″)
- Connectors 96 pin, 2 mm press-fit, quality grade 2
- Operating Temperature Active: 0°C … +70°C, Passive: -40°C … +85°C
- Relative Humidity 90%, non-condensing
See also different:
VME64x Chassis 4U 84HP 8 Slots
VME64x Chassis 4U 84HP 8 Slots Hartmann Electronic’s 8 slot 19” rack mountable VME solution – The VME64x 4U system. This VME chassis comes with two 250W cPCI hot-swap power supplies with room for up to 4 supplies and horizontally oriented card [...]
